Descriptive note on different types of drywall work

Drywall is the part of the building which is known to be gypsum plaster panels used in the construction of the interior walls and ceilings. Drywall is the trending interior wall building technique which is compressed between two paper sheets. The drywall sizes are available in many types and they are used according to the location and constructive methods. Implementation of drywall to the building is not the single process, they are done through series of methods and there are different jobs which are involved in drywall implementation and repairing portion.

Drywall installer: As the name depicts the drywall installer holds the responsibility of installing the drywalls to the building. The drywall installer initially chooses the type of panel considering the size, breath and composition to meet the temperature and moisture resistant capability. The portion of installation is inspected well for the damages and the drywall is installed. The technique may vary based on the type of building.

Drywall Examiner: The drywall examiners look for the quality of the drywalls. After repairing the notified defects the installation has to be continued. Drywall examiner consider many factors like age of the construction, materials used, etc… to find the source of the problems. The drywall is tested for the molds, asbestos, moisture and so forth and suggest for the repair if any. The passage of electric wires, odor is also inspected and verified by the drywall examiner.

Drywall Tapper: This is also called the drywall mudding process. The drywall installed in the form of sheet is fastened in the wall through number of screws. The drywall sheet is arranged in sectional order, thus they are projected to spoil the aesthetic value of the house. Thus tapping or mudding process is done with specialized tool accompanied with the drywall tapper. Tappers cover the outside and inside corners tape and mud respectively. This also fills the holes of the fastened screws with mud and smoothes the surface. Sanding process is repeated several times to reach the required texture.

Drywall Finisher: Drywall finishing jobs overlaps with the drywall tapping at certain situations. This is the end function of the drywall installation process. To be more specific, the wall or ceiling is prepared for the painting process through drywall finishing method. This finishing process is done after taping the joints of the drywall. The joint compound is applied on the wall over several times. While doing it, the joints and the screw areas are covered which then produce the even surface on the walls. The even wall surface favors the painting process.

Drywall Repairer: Drywall repair is the process which is done on the walls and ceilings of the already constructed house. As the days pass, the house will begin to lose the quality which then gets subjected to cracks, molds, etc… drywall repairer work on those flaws. Drywall holes both small and large, dents, battered corners and popped nails are the problems being resolved by the drywall repairers.

The above are some of the drywall works involved in the whole process of drywall installation. Drywalls are the construction process which purely a professional dependent work and cannot be dreamt of the DIY.